Title:Hazard Switch Repair 95 and Newer

Author:92s10sport

This fix works for all 95 and newer trucks

Tools and Parts required:

Parts:
- GM Hazard switch repair Kit part # 15174447
Tools:
- Needle Nose Pliers

The hazard Switch kit will come with a small tube of di-electric grease. Smear this on the entire thing before installation.

First look at your old hazard hole. You should see it broken similar to this.

Reach in with your needle nose pliers and grasp the edge of the old switch housing and pull upwards and remove

You should now have the entire assembly out..

Now simply insert your new hazard switch in hole and push down firmly..

New Switch:

And wala! You're done... Your final repair should look like this.. (though less blurry unless you're not wearing glasses then it will look just like this!

Takes about 3 minutes.

Written by: 92s10sport
Edited: AciDBatH666
Edited Title: 92SonomaST